We are glad to announce that Magni Telescopic Handlers are extending its fixed frame telehandlers range. The first two models to go into production are the 24m/5,500kg TH 5,5.24 and 19m/6,000kg TH 620. The TH 5,5.24 is one of three 5.5 tonne models with the TH 5,5.15 having a lift heigh of 15m and the TH 5,5.19 having a 19m lift height. They will be available in two versions with the full specification 75kw model or lower specification unit with 55kw power.

The TH 5,5.24 has a five section boom with maximum lift height of 23.9m at which it can handle up to 1,500kg, while it also offers an impressive forward reach of 19.1m. The unit has an overall width of just under 2.5m, while being just under seven metres long with a ground clearance of 420mm. Total overall weight is a hefty 17 tonnes and maximum travel speed 40kph.

The TH 620 has a four section boom and maximum lift height of 19.2m, at which it can handle two tonnes, while the maximum capacity is six tonnes. Maximum forward reach is 14.4m. Weighing 14.4 tonnes, the overall width is 2.55m with an overall length of 6.52m.

The new models have a very low stowed booms for a lower centre of gravity, which also provides a slightly unusual look when it is fully elevated. The cab has the same high specification as that fitted to Magni’s 360 degree models and includes a seven inch intuitive touch screen, cab pressurisation and filtration, air conditioning and a super deluxe seat. Power comes from a Stage V Deutz, with 4F or Stage III engines available for regions where emission standards are less rigid. The hydraulic system uses a high pressure pump delivering 350bar/5,100psi, with automatic load sensing and flow control to ensure maximum efficiency and multi function operation. Side shift, automatic eight degrees of levelling and automatic attachment recognition are all standard and includes a winch option for suspended loads.

Other models will include two heavy duty low units in the form of the 6t/10m TH 6.10 and five tonne/eight metre TH 5.8 – both which are available with a mining pack option. Eventually the company will have a range of 11 models and variants with its massive new production facility having the capacity to build 1,500 units of these new models alongside up to 3,500 360 degree models, production of which will move to the new 35,000 square metre factory. The video below highlights the range and shows the new facility:

Feel free to contact us for more information.

For more information:
Jurgen Vater, CEO at Kranlyft Group
+46 703 343 053 | jurgen.vater@kranlyft.com